ITS Commander


The ITS Commander is designed to improve system reliability and lower the cost of ownership through reduced maintenance costs. The system benefits both the owning agency and maintaining agency by promptly sending signals of an abnormal situation, allowing routine monitoring of critical equipment, and providing the capability to remotely control outlets to reboot equipment. These features can reduce unnecessary trips to inspect or service the cabinet saving money.

SKU: itscomm Category:


Remote Control

Includes the easy to use web-based interface with static IP address for controlling and monitoring connected devices. Users can gain access via the secure connection to the native web server using CAT5 cable.

Out of Range Alarms

  • Temperature: Sends signal if temperature is above or below user set ranges.
  • Dry-Contacts: Used to signal if user set conditions are broken, including but not limited to, door alarms, surge failure and battery charge.
  • Power: Upon power failure, system will send alarm and safely shut down.

Notifications can be set-up for multiple users via email, SMS, web-based interface or any combination thereof. Units are configured using our easy, user friendly web-based interface.
Logging of events is also fully configurable to include period based logging and/or event
based logging.

The ITS Advantage

Southern Manufacturing’s ITS Commander may be integrated with ITS enclosures from the factory. Power panel and factory installed equipment are pre-wired and connected.


  • 8 outlets rated at 15A, 120 VAC
  • 20 KA surge suppression
  • 12 optically-isolated inputs to monitor dry contacts
  • 6 electro-mechanical relays 10A at 120 VAC and 8A at 30VDC
  • Temperature Monitoring
  • Humidity monitoring
  • Analog Input 0 to 60 VDC
  • NTP server synchronization for realtime clock
  • Static IP address configuration, XML, SNMP interface options
  • Configurable data logging
  • Scheduling with up to 100 programmable events.